2019/07/19

Connect Microsoft Loopback Adapter and Dynamips

If you have connected Microsoft Loopback Adapter and Dynamips,

you can configure test lab without router or switch hardware.

Let's explain using examples.



1. First of all, add Microsoft Loopback Adapter

at Windows7, you can add 'Device Manager - Action - Add legacy hardware'

this interface is needed to connect to NIC.(speed limited 10Mbps)
































2. At 'Control panel - Network and Internet - Network Connections'

Double Click Network adapter that is connected Internet.

Check 'Sharing - Internet Connection Sharing'

and select Microsoft Loopback Adapter.



























3. then, open the IPv4 properties of Microsoft Loopback Adapter

input IP address and subnet mask.






























4. Now check the NIC's internal connection address.

find and click 'Network device list'.



























5. then, you can see NIC's inter connection address.

find Microsoft Loopback Adapter's address and copy it.



























6. Let's fix the Net file. at interface that you choose, paste the address.



























7. Turn off Windows firewall all.
































8. Finally did it. now you can ping any IP address.










No comments:

Post a Comment